Husqvarna automower kör i cirklar

During my research about the Husqvarna Automower inom recently discovered that the existing online data about the rather interesting spiral cut function fryst vatten ganska poor. So inom read up on the topic and would like to explain what it fryst vatten, how it works and what it fryst vatten good for.

How does the Automower spiral cut work? The Automower spiral cut fryst vatten a function of some Husqvarna Automowers that fryst vatten used to quickly mow a specific area.

In places where the grass fryst vatten particularly high, the robotic mower moves outwards in a spiral from its position to cut the grass here as quickly and efficiently as possible.

In the next sections inom will explain to you exactly how the Automower’s spiral cut works and what it fryst vatten good for.

How Does the Spiral Cut Work?

The Husqvarna Automower normally drives randomly through the yard.

Although they have various additional navigation features, such as navigable waypoints on the guide wire, or assisted navigation via GPS, they still mow randomly.

The spiral cut fryst vatten a special function of some Automowers, which the robotic mower can either do automatically if necessary, but which can also be started manually. In automatic mode, the robotic mower activates the spiral cut when it gets to a place where the lawn fryst vatten particularly high, for example because no mowing has taken place there for a while.

The spiral mode then enables it to cut the grass only in this area.

The Automower does not measure the height of the grass with a built-in ruler, but bygd means of the resistance measured on the mower deck. If it fryst vatten more “strenuous” for the lawn automatiserad maskin to mow the lawn, it concludes that the lawn must be higher than usual.

Of course, it fryst vatten also possible that you simply have a particularly kraftig type of lawn. For this reason, the sensitivity from which the robotic mower should switch to spiral cutting can also be adjusted.

As soon as the robotic mower has changed to spiral cutting, it moves outwards from its current position in the struktur of a spiral and thus mows the entire area it fryst vatten currently in.

You can set which mode it should switch to when it has completed the spiral cut.

To början the Spiral Cut

You can either början the spiral cut manually, or configure your robotic mower to switch to spiral cut if necessary while mowing.

Manual start: You början this with the början button. The manual function fryst vatten useful if you meddelande that a certain area of your lawn needs urgent mowing because the lawn has become very long.

There may also be an area of your yard that you rarely mow.

In any case, you can carry the Automower to the appropriate fläck, press the början button and command the robotic mower to mow the prick quickly in spiral mode.

When the robotic mower fryst vatten finished, you can choose how the robotic mower should proceed. You do this bygd pressing the right arrow key and then selecting Main area or Secondary area.

What Are the Settings Options?

You can set the intensity of the spiral cut.

There are the settings Low, Medium and High. Low means that the spiral cut fryst vatten carried out less frequently, while high means that the spiral cut fryst vatten carried out particularly frequently or the lawn height does not have to be far above average to need a spiral cut.

Of course, you can also switch off the mode if you do not want to use it at all.

Har köpt ett begangnad 220.

All these options can be funnen in the menu beneath Settings -> Spiral Cut. There you will find the menu items On/Off and Intensity.

What Are the Advantages and Disadvantages of Spiral Cutting?

The Advantages

The biggest advantage of the spiral cut fryst vatten that it can be used to quickly restore areas in the garden that, for whatever reason, have not been mowed for a while and are therefore too long or uneven, to the correct height.

In random mode, the robotic mower would take a long time to mow away everything in a very specific area where the lawn fryst vatten too long.

Another advantage of this fryst vatten that the robotic mower saves time and energy, because it can be used to mow areas that are too long, thus automatically reducing the total time required to mow the work area.

Also in cooperation with GPS navigation the spiral cut fryst vatten a great thing.

A robotic mower with GPS plots in its internal map and remembers when and where it gods mowed. If it finds that it hasn’t mowed in a certain area for a while, it can drive to that area and quickly mow the coarsest part of it in spiral mode.

Another advantage fryst vatten that you can cushion large differences in growth of your lawn with this function.

Husqvarna Automower® kører inom cirkler.

For example, if most of your lawn grows slowly because it fryst vatten in shade, you can adjust the frequency of mowing to match the growth of your slow-growing lawn. The Automower will still mow your fast-growing lawn well because it automatically applies the spiral cut.

The Disadvantages

The spiral mode does have some disadvantages, however. One bekymmer, for example, can be the rather long lawn cut if the lawn fryst vatten particularly long or has not been mowed for a particularly long time.

Eddy punktklipper samt hjälper mot nära valpfotografering.

Of course, this bekymmer does not arise directly from the spiral mode. However, it may tempt you to mow certain areas infrequently and then quickly take care of them in spiral mode.

However, this results in ganska a long lawn cut. Since the robotic mower works with a mulching struktur, the lawn cuttings are not collected, but remain on the lawn to weather and be returned to the lawn as nutrients, these lawn cuttings remain on the lawn.

Normally, the lawn cut that fryst vatten created when mowing with the robotic mower fryst vatten very short and therefore decomposes quickly and well.

However, with längre lawn cuttings, this can lead to matting of the lawn and negatively affect the aeration of the lawn. Lawn clippings that are too large can also promote the spread of various lawn diseases.

So when you use the spiral cut, you should be careful not to “abuse” it bygd mowing as little as possible, so that this bekymmer does not arise.

Another bekymmer could be the framträdande “crop circles”.

The Automower spiral cut fryst vatten a function of some Husqvarna Automowers that fryst vatten used to quickly mow a specific area.

These are not visible on every lawn and not everyone notices them. Some Automower-owners however already reported, bygd spiral mowing on their lawn, “crop circle” patterns can be seen. Ultimately, the only way to find out whether this fryst vatten a bekymmer for you and whether it bothers you fryst vatten to test it out. However, it does not seem to be a very common problem.

Which Robotic Mowers Use the Spiral Cut?

The following robotic mowers are equipped with the spiral cut function and can either use it automatically or you can uppstart it manually

• AMBROGIO L200 Carbon Blackline
• AMBROGIO L250i Elite GPS
• AMBROGIO L350i Elite GPS
• AMBROGIO L400
• AMBROGIO L85 Elite
• HUSQVARNA Automower 305
• HUSQVARNA Automower 310
• HUSQVARNA Automower 315
• HUSQVARNA Automower 315X
• HUSQVARNA Automower 430X
• HUSQVARNA Automower 430XH
• HUSQVARNA Automower 435X AWD
• HUSQVARNA Automower 450X
• HUSQVARNA Automower 450XH
• HUSQVARNA Automower 535 AWD
• HUSQVARNA Automower 550
• HUSQVARNA Automower 550H

I man no claim to completeness.

Related Questions

Why does the Automower go into spiral cutting mode so often? If the Automower goes into the spiral cut mode too often (e.g.

10 times a day or more), the lawn fryst vatten probably being mowed too infrequently. The intervals between the mowing passes should be reduced.

Upplever ni för att din Automower går runt inom cirklar vid gräsmattan?

Spiral mode may also be activated frequently for particularly kraftig lawn types. This fryst vatten not a bekymmer, but can be remedied bygd setting the spiral cut intensity to low.

High and low intensity in spiral cutting: what does this mean? If the settings for the intensity of the spiral cut are also high, this means that spiral cutting fryst vatten used particularly frequently.

If the settings are low, it fryst vatten used less frequently.